| |
Dec 26, 2024
|
|
|
|
|
2013-2014 Catalog ARCHIVED CATALOG: Content may no longer be accurate.
Welding Emphasis, Manufacturing Engineering Technology (BS)
|
|
 Return to: College of Applied Science & Technology
|
Manufacturing Engineering Technology
- Program Prerequisite: Not required.
- Minor: Not required.
- Grade Requirements: A grade of “C” or better in all major courses, support courses, and technical electives is required (a grade of “C-” is not acceptable) in addition to an overall GPA for all courses of 2.00 or higher. Also refer to the general grade requirements for graduation in the Degree and General Education Requirements section of this catalog.
- Credit Hour Requirements: Credit hours vary as shown for different emphasis areas: the BS in Manufacturing Engineering Technology with a Production Operations and Control Emphasis requires 124 credit hours, the BS in Manufacturing Engineering Technology with a Welding Emphasis requires 126 credit hours, and the BS in Manufacturing Engineering Technology with a Plastics and Composites Emphasis requires 126 credit hours. A total of 40 upper division credit hours is also required (courses numbered 3000 and above). Transfer students are required to take a minimum of 30 credit hours at Weber State University.
- Program Code: Manufacturing (8037BS), with Emphasis in Plastics & Composites (8058), Production Ops & Control (8059), or Welding (8060).
- CIPC: Manufacturing (150613), with Emphasis in Plastics & Composites (150607), Production Ops & Control (150613), or Welding (150614).
Advisement All Manufacturing Engineering Technology students are required to meet with their faculty advisor at least annually for course and program advisement. Please call the department secretary at 801-626-6305 for the name of your advisor and to schedule an appointment. Admission Requirements Declare your program of study (see Enrollment Services and Information ). Refer to the Program Prerequisite on the previous page. There are no additional special admission or application requirements for this program. General Education Refer to Degree and General Education Requirements for Bachelor of Science requirements. Consult with your advisor for specific general education guidelines. Major Course Requirements for BS Degree
Manufacturing Engineering Technology Courses Required (46 credit hours)
Technical Electives (3 credit hours minimum)
A minimum of 3 credit hours of technical electives chosen from the following list are required. Suggested Course Sequence for the Welding Emphasis
The following suggested course sequence is provided to assist students in planning their schedules. Use this only as a guideline and be sure to consult with your advisor. | Freshman Fall | Freshman Spring | | MFET 1210 | 3 | DET 1160 | 3 | | DET 1060 | 3 | ENGL EN2010 | 3 | | Computer & Information
Literacy Exams or Courses | 2/4 | MATH 1210 | 4 | | ENGL 1010 | 3 | CHEM PS1110 | 5 | | MATH QL1080 | 5 | | | | Total Hours | 16 | Total Hours | 15 | | | | Sophomore Fall | Sophomore Spring | | MFET 2150/L | 3 | MFET 2300 | 5 | | DET 2460 | 3 | MFET 2410 | 3 | | ECON SS1010 | 3 | CEET 1850 | 4 | | COMM HU2110 | 3 | Gen Ed HU | 3 | | PHYS PS2010 or 2210 | 5 | | | | Total Hours | 17 | Total Hours | 15 | | | | Junior Fall | Junior Spring | | MFET 3630/L | 3 | MFET 2670 | 3 | | MFET 3060 | 3 | MFET 3910 | 4 | | MFET 3750/L | 3 | MFET 3820 | 3 | | MFET 3810 | 3 | MFET 3550 | 3 | | MFET Elective | 3 | MFET 3760/L | 3 | | Total Hours | 15 | Total Hours | 16 | | | | Senior Fall | Senior Spring | | MFET 4580/L | 3 | MFET 4620L | 2 | | MFET 4610 | 3 | MFET 4090 | 2 | | MFET 4610L | 2 | MFET 4310 | 2 | | HIST 1700 | 3 | Gen Ed SS | 3 | | MFET 4590
| 3 | Gen Ed CA/HU | 3 | | | | Gen Ed LS
| 3 | | | | MFET 4995 | 1 | | Total Hours | 14 | Total Hours | 16 | |
Return to: College of Applied Science & Technology
|
|
