Mar 29, 2024  
2021-2022 Catalog 
    
2021-2022 Catalog ARCHIVED CATALOG: Content may no longer be accurate.

Course Descriptions - PDD, ETM, MFET, MSE


Department of Manufacturing and Systems Engineering

Courses

  • ETM 5913G - Six Sigma Tools I

    Credits: (3)
    This distance learning course provides an introduction to the six sigma body of knowledge as defined by the American Society of Quality (ASQ). The course will examine the foundations of six sigma and the statistical tools used in the initial stages of the DMAIC problem solving methodology.
    Pre-requisite(s): BS with three years relevant experience & an engineering statistics undergraduate course or equivalent such as MATH 3410  is required, or instructor’s approval. Students also must be able to work on an approved six sigma project at a firm.
  • ETM 5923G - Six Sigma Tools II

    Credits: (3)
    This distance learning course is a follow-on to the initial six sigma course and provides additional detail on the analyze, improve and control portions of the DMAIC problem solving methodology. This course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
    Pre-requisite(s): ETM 5913G , Six Sigma Tools I.
  • ETM 5933G - Lean Tools

    Credits: (3)
    This course teaches students lean manufacturing tools for continuous improvement in a manufacturing environment.
    Pre-requisite(s): BS with three years relevant experience & an engineering statistics undergraduate course or equivalent such as Math 3410 is required, or instructor’s approval. Students also must be able to work on an approved six sigma project at a firm. This distance learning course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
  • ETM 5943G - Lean-Sigma Implementation

    Credits: (3)
    This course introduces students to the implementation skills necessary to successfully combine and apply lean manufacturing and six sigma concepts in small to mid-sized manufacturing facilities. This course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
    Pre-requisite(s): ETM 5923G , ETM 5933G .
  • MFET 1000 - Manufacturing Engineering Technology Fundamentals

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    This is an introductory course for students interested in majoring in Manufacturing Engineering Technology.  Students will be exposed to Manufacturing Engineering Technology through several hands-on laboratory experiences that introduce them to concepts needed for future classes.  Students will gain a clear understanding of degree requirements and possible career paths.
  • MFET 1150 - Pre-Professional Seminar in Manufacturing

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    An introductory course for students planning to major in Manufacturing Engineering Technology. An explanation of the Manufacturing Engineering Technology curriculum and its place in the occupational spectrum. Current job functions of manufacturing engineering technologists will be discussed by manufacturing engineers and technologists from industry.
  • MFET 1210 - Machining Principles Lecture/Lab I

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Introduction to machining processes through theory and practice including: setup and operation of the engine lathe & milling machine, machine and tool performance, inspection techniques, basic blueprint reading, and process planning. Students will utilize lab time to complete assignments as required.
    One lecture per week and two 3-hour labs per week are required.
  • MFET 1810 - Experimental Courses

    Credits: (1-4)
    Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript.  Refer to Experimental Courses .
  • MFET 1810 - Manufacturing Electronics

    Credits: (4)
    Experimental Course, Contact Department for More Information
    Introduction to basic electricity, electrical and electronics principles and the applications of these principles to AC and DC circuitry and motor controls. The course will give students the foundation for required courses in welding power supplies and automation.  An integrated hands-on lab will reinforce concepts taught in the classroom.

  • MFET 1820 - Manufacturing Electricity and Electronics

    Credits: (4)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Introduction to basic electrical and electronic principles and the application of these principles to AC and DC circuits. The course will give students the foundation for required manufacturing courses in welding power supplies, motor controls and automation.  An integrated hands-on lab will reinforce concepts taught in the classroom
    Pre-requisite(s): MATH 1010  or QL.
  • MFET 1890 INT - Cooperative Work Experience

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Open to all first year students in Manufacturing Engineering Technology. Department approval required before registration. Provides academic credit for on-the-job experience. Grade and amount of credit will be determined by the department.
  • MFET 2150 - Metal Forming, Casting and Welding

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Introduction to industrial metal forming, casting and welding processes, equipment selection, design criteria, shop procedures and terminology.
    Two one-hour lectures per week and one two-hour lab
    Co-Requisite(s): MFET 2150L . (MFET 2150L ) is required.
  • MFET 2150L - Metal Forming, Casting & Welding Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Lab application of theories taught in MFET 2150  by use of student projects.
    Co-Requisite(s): MFET 2150 .
  • MFET 2151 - Metal Forming Lecture/Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Introduction to industrial metal forming processes, equipment selection, design criteria, shop procedures and terminology.
    Pre-requisite(s): Instructor Approval.
  • MFET 2152 - Metal Casting Lecture/Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Introduction to industrial metal casting processes, equipment selection, design criteria, shop procedures and terminology.
    Pre-requisite(s): Instructor Approval.
  • MFET 2153 - Metal Welding Lecture/Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Introduction to industrial metal welding processes, equipment selection, design criteria, shop procedures and terminology.
    Pre-requisite(s): Instructor Approval.
  • MFET 2300 - Statics and Strength of Materials

    Credits: (5)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Principles of forces, moments, resultants & static equilibrium of force systems, center of gravity, friction, and free body diagram analysis. Also concept of stress and strain, shear, bending moments, torsion, bending stresses in beams and stress resolution and shear.
    Five lectures per week.
    Pre-requisite(s): PHYS 2010 /L or PHYS 2210 /L; MATH 1060  or MATH 1080  or MATH 1210 .
  • MFET 2310 - Statics for Engineering Technology

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Topics include: Principles of forces, moments, resultants & static equilibrium of force systems, center of gravity, friction, and free body diagram analysis.
    Pre-requisite(s): PS PHYS 2010 /L or PS PHYS 2210 /L and MATH 1210  or MATH 1110 .
  • MFET 2320 - Mechanics of Materials

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Topics include: Principles of stress and strain, shear, bending moments, torsion, and bending stresses in beams.
    Pre-requisite(s): MFET 2310 .
  • MFET 2360 - Manufacturing Processes and Materials

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Survey of industrially important processes used to change material shape and condition for industrial use. Survey of industrially important materials and the principles of material behavior.
  • MFET 2410 - Quality Concepts and Statistical Applications

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    This is the first course in a series of three designed to impart the Six Sigma body of knowledge. It integrates managerial, technological and statistical concepts across all functions of an organization to ensure that a product is fit for use. Provides a foundation in current quality paradigms and introduces students to software tools (MS Excel and Minitab) used to statistically analyze problems encountered in manufacturing firms.
    Three lectures per week.
    Pre-requisite(s): MATH 1010  or Aleks (score: 30 or above).
  • MFET 2440 - Computer Numeric Control (CNC) in Manufacturing

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    This course is designed for those who have little or no experience with CNC programming, setup or operations. Manual programming, APT programming, and Mazatrol (a conversational programming language) will be taught. In addition, an introduction to CAD/CAM will also be discussed.
    A three-hour lab, once a week is required.
    Pre-requisite(s): MATH 1080  or MATH 1050  and MATH 1060 ; MFET 1210 .
    Co-Requisite(s): MFET 2440L .
    May be repeated 3 times up to 6 credit hours.
  • MFET 2440L - CNC in Manufacturing Lab

    Credits: (1)
    Applications of the theory taught in MFET 2440 . Introduction to the setup & operation of the CNC lathe and mill.
    One 3-hour lab per week.
    Co-Requisite(s): MFET 2440 .
  • MFET 2500 - Process Automation I

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    A study of the elements used in manufacturing automation and control technologies including: basic elements of an automated system, cost benefit analysis, programmable logic controllers, robotics (servo and non-servo), material handling devices and automated inspection technologies. One 50 minute lecture per week.
    Pre-requisite(s): EET 1850 .
    Co-Requisite(s): MFET 2510 .
  • MFET 2510 - Process Automation I Lab

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Students duplicate demonstration sequences of automation equipment and develop new routines in: Controlling servo and non-servo robots, computer-aided manufacturing systems, programmable logic controllers, and other devices used in process automation. Labs will include additional lectures.
    Pre-requisite(s): EET 1850 .
    Co-Requisite(s): MFET 2500 .
  • MFET 2550 - Basics of Quality Engineering

    Credits: (2)
    Approaches quality from the perspective of the production technician using applied statistics, total quality concepts, inspection techniques and methods and nonconforming material control. Addresses sampling principles used in production management as well as a review of industry accepted standards. (ASQC Series)
    Note: This course is offered in the evenings only.
  • MFET 2610 - Quality Improvement Principles and Techniques

    Credits: (2)
    This course assesses vital knowledge of quality tools and their uses by individuals, from non-traditional quality areas, who are involved in quality improvement projects. The course examines the rapid spread of quality principles and practices throughout organizations, and covers the essentials of quality management for individuals who manage quality programs, but who are not necessarily specialized in traditional quality areas. The course prepares students for the Certified Quality Improvement Associate examination administered by the American Society for Quality.
  • MFET 2670 - GMA, FCA and GTA Welding

    Credits: (1)
    Typically Taught Spring Semester: Full Sem
    Theory and skills course covering Gas Metal Arc Welding, Flux Core Arc Welding, and Gas Tungsten Arc Welding.
    Pre-requisite(s): MFET 2150 /MFET 2150L  or MFET 2153 .
    Co-Requisite(s): MFET 2670L .
  • MFET 2670L - GMA, FCA and GTA Welding Lab

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    A “hands on” lab that reinforces the theory and skills course (MFET 2670 ) covering Gas Metal Arc Welding, Flux Core Arc Welding, and Gas Tungsten Arc Welding.
    Pre-requisite(s): MFET 2150 /MFET 2150L .
    Co-Requisite(s): MFET 2670 .
  • MFET 2830 - Directed Readings in Manufacturing Engineering Technology

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Individual research on topics requested by industry or which meet special needs of Manufacturing Engineering Technology students.
    Pre-requisite(s): Departmental approval.
  • MFET 2850 - CNC/CAM for Plastics and Composites Lecture/Lab

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Traditional and nontraditional methods for machining organic-matrix and metal-matrix composites are reviewed. Traditional machining procedures are discussed together with the damage introduced into composites by these manipulations. Computer Numerical Control (CNC) codes and Computer Aided Manufacturing are covered, focusing on the production of plastic products and tooling. Machining concepts also including laser, water-jet, electrodischarge, electrochemical spark, and ultrasonic machining.
    Pre-requisite(s): MFET 1210 /L.
  • MFET 2860 - Plastics/Composites Materials & Properties

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Coverage of the most common commercial plastics including their additives, fillers, and fibers; includes common physical tests used to determine material characteristics; writing intensive.
    Pre-requisite(s): CHEM 1110 .
  • MFET 2870 - Design of Plastics/Composites Products

    Credits: (3)
    Typically Taught Spring Semester: Full Sem
    Designing plastic parts utilizing CAD and CAE technologies for the design and for structural, dimensional, and process evaluation and optimization. A strong emphasis in design principles related to design of plastics products. Also analysis of functional requirements, structural properties, aesthetic qualities and cost relationships. The student will gain experience in product design and material evaluation.
    Pre-requisite(s): PDD 1160  and MFET 2860 .
  • MFET 2890 INT - Cooperative Work Experience

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Open to all second year students in Manufacturing Engineering Technology. A continuation of MFET 1890 .
  • MFET 2920 - Short Courses, Workshops, Institutes and Special Programs

    Credits: (1-3)
    Variable Title
    Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript.
    Pre-requisite(s): Departmental approval.
  • MFET 3010 - Tool Design

    Credits: (3)
    Principles of workpiece control including: Geometric, dimensional, and mechanical control. Other topics include: process tolerance stacks, design of special tools and gauges, applications in the production of manufactured parts, tool drawings, specifications, and modular tooling.
    Three lectures per week.
    Pre-requisite(s): MFET 1210 ; PDD 1160 .
  • MFET 3060 - Codes, Weld Inspection, and Quality Assurance

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Study of ASME and AWS codes as relating to procedure qualification and welder qualification for fabrication of pressure vessels and structures, and how codes relate to quality assurance and ISO 9000.
    Pre-requisite(s): MFET 2150 /MFET 2150L  or MFET 2153 .
  • MFET 3310 - Material Selection and Heat Treat

    Credits: (2)
    Terminology, concepts and principles involved in the selection, specification and processing of engineering materials so they meet design criteria including load, life, and appearance. Testing methods to determine those properties and characteristics. Manual and computer assessing of material data.
    Two lectures per week.
    Pre-requisite(s): MFET 1210 /L, MFET 2300 , CHEM 1110 .
    Co-Requisite(s): MFET 3310L .
  • MFET 3310L - Material Selection and Heat treat Lab

    Credits: (1)
    Application of theory taught in MFET 3310 .
    One 2-hour lab per week.
    Co-Requisite(s): MFET 3310 .
  • MFET 3320 - Machine Design

    Credits: (2)
    Application of engineering fundamentals to the design of individual machine components such as shafts, couplings, springs, bearings, gears, fasteners, clutches, and breaks. Students will be required to complete a design project emphasizing manufacturing equipment.
    Two lectures per week.
    Pre-requisite(s): MFET 2300 .
  • MFET 3340 - Applied Fluid Power

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Principles of fluid mechanics and component operation as they apply to the design of hydraulic and pneumatic systems. Computer programs may be used to analyze and design systems. Two lectures per week.
    Pre-requisite(s): MFET 2300  or MFET 2320  or ENGR 2010  and ENGR 2140 ; PHYS 2010 /L or PHYS 2210 /L.
    Co-Requisite(s): MFET 3340L .
  • MFET 3340L - Applied Fluid Power Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Application of the theory taught in MFET 3340 .
    One 2-hr lab per week.
    Co-Requisite(s): MFET 3340 .
  • MFET 3350 - Plastic and Composite Manufacturing

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Design and processing of plastic and composite materials for industrial applications.
    Two lectures per week.
    Pre-requisite(s): CHEM 1110  or CHEM 1210 .
    Co-Requisite(s): MFET 3350L .
  • MFET 3350L - Plastic and Composite Manufacturing Lab

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Application of the theory taught in MFET 3350 .
    Two 2-hr labs per week.
    Pre-requisite/Co-requisite: MFET 3350 .
  • MFET 3460 - Engineering Design using Solid Modeling

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    An advanced computer-aided design course using state-of-the-art solid modeling CAD/CAM software. Topics include: 3D parametric solid modeling, applications associativity, design-by-feature, assembly modeling, injection mold design, flat pattern development, design analysis using FEA, realistic rendering, and detailing.
    Pre-requisite(s): PDD 1010 .
    Co-Requisite(s): MFET 3460L .
  • MFET 3460L - Engineering Design using Solid Modeling Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Lab assignments will include: Fundamentals of 3D parametric solid modeling, Extrude & Revolve Features, Sweep & Loft Features, Assembly Modeling, Injection Mold Design, Flat Pattern Development, Design Analysis using FEA, and others.
    Pre-requisite(s): PDD 1010  and WEB 1700 .
    Co-Requisite(s): MFET 3460 .
  • MFET 3510 - Basics of Supply Chain Management

    Credits: (2)
    Introductory course for production and inventory management personnel which provides basic definitions and concepts for planning and controlling flow of materials into, through, and out of an organization. Explains fundamental relationships of supply chain from suppliers to customers. Addresses manufacturing systems, forecasting, master planning, material requirements planning, capacity management, production activity control, purchasing, inventory management, distribution, quality management, and Just-in-Time manufacturing. (APICS Series).
    Note: This course is offered in the evenings only.
  • MFET 3550 - Manufacturing Supervision

    Credits: (3)
    Typically Taught Fall Semester: Full Sem Online
    Typically Taught Spring Semester: Full Sem
    The application of supervision skills. Students will gain an understanding of; motivation of subordinates, personal leadership theories, problem-solving and decision-making techniques, organizational communication, employee selection, evaluation and training process, and organizational structures. Topics will include; the American Disabilities Act, OSHA and environmental issues, Equal opportunity Employment, and Affirmative Action issues.  Three lectures per week.
    Pre-requisite(s): MFET 2410  (or MATH 1040 ).
  • MFET 3560 - Advanced Quality Engineering

    Credits: (2)
    Addresses the application of advanced quality techniques by personnel in positions of responsibility such as manufacturing leads and supervisors. Uses statistics, metrology, inspection methods, quality management concepts, and sampling principles to address process decisions involving both overall quality and costs. (ASQC Series).
    Pre-requisite(s): MFET 2550 .
    Note: This course is offered in the evenings only.
  • MFET 3570 - Manufacturing Quality Auditing

    Credits: (2)
    Utilizes auditing principles and quality management tools and techniques to prepare an individual to plan and conduct, or prepare an organization, for a quality audit. Links directly to process associated with implementation of ISO 9000 standards.
    Two one-hour lectures per week. (ASQC Series).
    Pre-requisite(s): MFET 2410  or equivalent.
    Note: This course is offered in the evenings only.
  • MFET 3580 - Certified Mechanical Inspector

    Credits: (2)
    Provides the student with terminology, concepts and tools needed to be professionally competent in advanced quality management. The course will also be helpful to those preparing to take the ASQC CMI Certification Exam. (ASQC Series).
    Note: This course is offered in the evenings only.
  • MFET 3610 - Machining Processes Lecture/Lab II

    Credits: (3)
    The manufacture and assembly of precision and interchangeable parts using conventional lathes, mills, drills, and grinders. Introduction to geometric dimensioning & tolerancing (GD&T), and advanced inspection techniques. Students will utilize lab time to complete assignments as required.
    One lecture per week and two 3-hour labs per week are required.
    Pre-requisite(s): MFET 1210 .
  • MFET 3620 - Senior Capstone Project Planning

    Credits: (.5)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    This course must be taken the semester prior to beginning the MFET senior project sequence of classes (MFET 4610, MFET4610L and MFET 4620L).  Capstone requirements will be discussed.  Capstone projects will be selected and teams formed with faculty input. 
    Pre-requisite(s): Department Approval.
  • MFET 3630 - Fusion Joining and Brazing Processes

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Study of SAW, ESW, GMAW, EG, RW, PAW, PAC, Electron Beam, Laser, Friction, Brazing, and other welding processes.
    Pre-requisite(s): MFET 2670 /MFET 2670L .
    Co-Requisite(s): MFET 3630L .
  • MFET 3630L - Fusion Joining and Brazing Processes

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    A “hands-on” lab that reinforces the concepts taught in MFET 3630  of SAW, ESW, GMAW, EG, RW, PAW, PAC, Electron Beam, Laser, Friction, Brazing, and other welding processes.
    Pre-requisite(s): MFET 2670 /MFET 2670L .
    Co-Requisite(s): MFET 3630 .
  • MFET 3650 - Quality Management Institute

    Credits: (3)
    This course consists of application process control and problem solving techniques including statistical process control (SPC), measurement systems analysis, and process capability analysis. Students will apply cause-and-effect diagrams, check sheets, sampling, line and bar charts, Pareto charts, scatter diagrams, variation, probability plots, x-R charts, gate repeatability and reproducibility (gage R & R) on course projects. Curriculum will include practical application exercises.
    Pre-requisite(s): MFET 2410 , MATH 1010  Intermediate Algebra or equivalent, and Basic Statistics course (MATH 1040 ) or equivalent.
  • MFET 3710 - Computer Aided Manufacturing and Rapid Prototyping

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    This course will introduce and explain concepts behind Computer-Automated Manufacturing (CAM). It will define elements, terms, and concepts involved with CAM. Elements of rapid prototyping will also be covered from conceptual design in solids to production of tooling and parts. This course is designed for those who have the basic understanding of the setup and operation of CNC machine tools and programming. Software will be used to perform the CAM operations, such as part generation and post processing.
    Pre-requisite(s): MFET 2440 /MFET 2440L , PDD 1010 , PDD 1160  or MFET 3460 .
    Co-Requisite(s): MFET 3710L .
  • MFET 3710L - Computer Aided Manufacturing and Rapid Prototyping Lab

    Credits: (1)
    Typically Taught Spring Semester: Full Sem
    A “hands-on” lab that reinforces the concepts taught in MFET 3710 . Students will learn how to transfer CNC part programs from a PC to the CNC machine controller. Testing, editing and running their part programs on the CNC machines will also be covered.
    May be repeated twice up to 3 credit hours.
  • MFET 3750 - Welding Metallurgy I

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Metallurgical principles applied to welding and weldability of ferrous metals.
    Pre-requisite(s): MFET 2150 /MFET 2150L  or MFET 2153 , CHEM 1110  or CHEM 1210 .
    Co-Requisite(s): MFET 3750L .
  • MFET 3750L - Welding Metallurgy I Lab

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    A “hands-on” lab that reinforces the concepts taught in MFET 3750  of metallurgical principles applied to welding and weldability of ferrous metals.
    Pre-requisite(s): MFET 2150 /MFET 2150L , CHEM 1110 .
    Co-Requisite(s): MFET 3750 .
  • MFET 3760 - Welding Metallurgy II

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    Metallurgical principles applied to welding and weldability of nonferrous metals.
    Pre-requisite(s): MFET 3750 /MFET 3750L .
    Co-Requisite(s): MFET 3760L .
  • MFET 3760L - Welding Metallurgy II Lab

    Credits: (1)
    Typically Taught Spring Semester: Full Sem
    A “hands-on” lab that reinforces the concepts taught in MFET 3760  of metallurgical principles applied to welding and weldability of nonferrous metals.
    Pre-requisite(s): MFET 3750 /MFET 3750L .
    Co-Requisite(s): MFET 3760 .
  • MFET 3810 - Manufacturing Process Planning and Introduction to Systems Design

    Credits: (3)
    Experimental Course, Contact Department for More Information
    Fundamentals of process planning. Analyzing product specifications and production requirements for manufacturing. Equipment selection and its relationship to basic facility layout, production management systems and material-handling system design for mrp based systems and lean flow systems.

  • MFET 3820 - Nondestructive Testing

    Credits: (3)
    Typically Taught Spring Semester: Full Sem
    Fundamental concepts relating to liquid penetrant, magnetic particle, ultrasonics, and radiography and other NDT processes.
    Pre-requisite(s): MATH 1210  or MATH 1110  and PHYS 2010  or PHYS 2210 .
  • MFET 3830 - Reinforced Plastics/Advanced Composite Lecture/Lab

    Credits: (3)
    Typically Taught Spring Semester: Full Sem
    Polymer and reinforcement systems; material testing; mold design and development; laboratory involvement in reinforced plastics production processes.
    Pre-requisite(s): MFET 3350 /MFET 3350L  and MFET 2860 .
  • MFET 3870 - Mold Design and Process Strategies Lecture/Lab

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Overview of mold design and the development of strategies and techniques integrating CAD and CAE technologies for optimizing part quality, moldability, and productivity. Additional study on design and construction of various types of production molds that are used for processing plastics in final shape. Product design in relationship to molding techniques and various techniques and materials used to construct the molds are the major units of study.
    Pre-requisite(s): MFET 2850  and MFET 2870 .
  • MFET 3890 INT - Cooperative Work Experience

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Open to all third year students in Manufacturing Engineering Technology. A continuation of MFET 1890 .
  • MFET 4050 - Detailed Scheduling and Planning I

    Credits: (2)
    Techniques and practices of detailed scheduling and planning of inventory management including order review methodologies, policies and functions of inventory. Covers lot sizing, safety stock techniques, demand, and Just-in-Time as they relate to detailed scheduling and planning.
    Pre-requisite(s): MFET 3510  or equivalent. (APICS series).
    Note: This course is offered in the evenings only.
  • MFET 4090 - Welding Power Sources

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Study of power sources used to generate and control voltage and amperage for welding.
    Two lectures per week.
    Pre-requisite(s): EET 1850 .
  • MFET 4150 - Execution and Control of Operations

    Credits: (2)
    Focuses on prioritizing and sequencing work, executing work plans, implementing controls, reporting activity results, and evaluating and providing feedback on performance. Eval.
    Pre-requisite(s): MFET 3510  or equivalent. (APICS Series).
    Note: This course is offered in the evenings only.
  • MFET 4200 - Manufacturing Processes

    Credits: (2)
    Manufacturing processes define the methods that companies use in designing, producing, and delivering goods and services required by customers. The manufacturing processes provide the execution component to the other activities of the integrated manufacturing system. Beginning with customer requirements and needs, they design, build, operate, upgrade, and maintain a manufacturing process which is most supportive of and consistent with those needs and requirements. To achieve these objectives, manufacturing processes draw on three different but very interrelated subsystems: industrial facilities management, process design and development, and manufacturing. (APICS Series)
    Note: This course is offered in the evenings only.
  • MFET 4210 - Cost Estimating and Engineering Economics

    Credits: (2)
    Production cost structure, operation costing, break-even analysis, make buy decision, and capital equipment justification. Computer aids are used to analyze cost data.
    Three lectures per week.
    Pre-requisite(s): MATH 1080 ; WEB 1700 .
    Co-Requisite(s): MFET 4610 .
  • MFET 4250 - Detailed Scheduling and Planning

    Credits: (2)
    Detailed explanation of inventory management including order review methodologies, policies and functions of inventory. Covers material requirements planning (MRP) and other material planning and capacity requirements planning techniques. Includes concepts, principles, interfaces, desired characteristics, applications, and supplier relations.
    Pre-requisite(s): MFET 3510  or equivalent. (APICS Series)
    Note: This course is offered in the evenings only.
  • MFET 4300 - Design of Experiments

    Credits: (2)
    A step-by-step description of procedures used to organize, conduct and evaluate industrial experiments. Emphasizes the usefulness of results and the decision criteria for choosing the proper design.
    Pre-requisite(s): MFET 2410  
  • MFET 4310 - Corrosion and Corrosion Control

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    Analysis of corrosion mechanisms for ferrous metals, nonferrous metals, and nonmetallic materials, as well as the control of corrosion.
    Pre-requisite(s): CHEM 1110  and MATH 1080 .
  • MFET 4315 - Welding Robotics

    Credits: (2)
    Typically Taught Spring Semester: Full Sem
    This course is designed to introduce students to welding robot programming and applications. Students will demonstrate skills learned in welding robot programming in applied labs. They will learn parameters, terms and nomenclature and obtain knowledge of applications and configurations in industry settings.
    Pre-requisite(s): MFET 2670 , MFET 2670L .
  • MFET 4350 - Principles of Lean Manufacturing

    Credits: (2)
    Typically Taught Spring Semester: Online
    This course introduces students to lean manufacturing and waste reduction concepts such as work standardization, visual manufacturing & workplace organization, value stream mapping, setup reduction & batch size reduction, quality at the source, point of use storage, total productive maintenance, pull systems/kanbans, tack time calculation and cellular/synchronous manufacturing design concepts.
    A combination of lectures, videos and hands on exercise will be used.
  • MFET 4550 - Advanced Quality Principles

    Credits: (2)
    Provides advanced study in all aspects of the application of quality principles to a production environment. The course will involve case study and application of quality theory. Students should have a broad knowledge of organizational structure and planning, quality techniques, customer satisfaction and focus, project management, and human resource management. Cooperative experience in a business/industry is recommended. (ASQC Series)
    Pre-requisite(s): MFET 2410  or equivalent.
    Note: This course is offered in the evenings only.
  • MFET 4580 - Process Automation II & Robotics

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    An advanced study of the elements used in manufacturing automation and control technologies including: the use of basic elements of an automated system, cost benefit analysis, programmable logic controllers, robotics (servo and non-servo), material handling devices and automated inspection technologies. One 1-hour lecture per week.
    Pre-requisite(s): MFET 2500  and MFET 2510 .
    Co-Requisite(s): MFET 4585 .
  • MFET 4585 - Process Automation II Lab

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Students work in teams to demonstration proficiency programming individual automated manufacturing stations using Allen Bradley PLCs (Cognex Vision Systems, RF Systems, bar coding, pick and place feeding station, gauging station, part orientation processing station, sorting-buffering station, servo robotic assembly station-Fanuc, torque assembly station, inventory storage station, electro-hydraulic station).  Students then work as a class to integrate an entire manufacturing process using all of the stations for a small part.  Labs will include additional lectures.
    Pre-requisite(s): MFET 2500  and MFET 2510 .
    Co-Requisite(s): MFET 4580 .
  • MFET 4610 - Senior Project Management & Cost Estimating

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    This is designed as a capstone course for students and is to be taken in the senior year of their program. The course will teach students fundamental principles in Project Management, Cost Estimating, and Engineering Economics that will be necessary to successfully complete their Senior Project experience. Students must apply and gain departmental approval before entering Senior Project. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. All students approved for Senior project will register for this course regardless of individual project group assignments.
    Pre-requisite(s): MFET 3620  and AAS or AS Degree.
    Co-Requisite(s): MFET 4610L  for manufacturing students or PDD 4600  for design graphics students.
  • MFET 4610L - Senior Project Lab

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Must apply for senior project before March 1 of the previous year. Must have department approval. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. Time: as required to complete the project. Two consecutive semesters.
    Co-Requisite(s): MFET 4610  (with MFET 4610L only).
  • MFET 4620L - Senior Project Lab

    Credits: (2)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Must apply for senior project before March 1 of the previous year. Must have department approval. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. Time: as required to complete the project. Two consecutive semesters.
  • MFET 4650 - Software Quality Engineering Principles

    Credits: (2)
    This course prepares the student to incorporate quality development and implementation as a software design team member. The course provides instruction on concepts, principles and techniques to develop a comprehensive understanding of software inspection, testing, verification, and validation. Participants will learn to implement software development and maintenance processes and methods. This course also prepares the student for the Certified Systems Quality Engineer examination administered through American Society for Quality.
  • MFET 4670 - Reliability Engineering Principles

    Credits: (2)
    This course prepares the student to work as a design team member to incorporate reliability considerations into a basic design. Course provides information on application of proven techniques to achieve quality product results. This course also prepares the student for the Certified Reliability Engineer examination administered through American Society for Quality.
  • MFET 4750 - Master Planning of Resources

    Credits: (2)
    Explore processes used to develop sales and operations plans, forecast internal and external demand, create the master schedule consistent with business policies, objectives and resource constraints. (APICS series).
    Pre-requisite(s): MFET 3510 .
    Note: This course is offered in the evenings only.
  • MFET 4770 - Strategic Management of Resources

    Credits: (2)
    The relationship of existing and emerging processes and technologies to manufacturing strategy and supply chain related functions. Addressing aligning resources with strategic plan, integrating operating processes to support the strategic plan, and implementing change.
    Pre-requisite(s): MFET 3510  and be familiar with concepts addressed in all other APICS courses. (APICS series).
    Note: This course is offered in the evenings only.
  • MFET 4800 - Individual Research in Manufacturing Technology

    Credits: (1-3)
    Special individual research and development projects in Manufacturing and Engineering Technology. Credit and time determined by the student and the faculty project supervisor.
    Pre-requisite(s): Permission of instructor.
  • MFET 4830 - Directed Readings in Manufacturing Engineering Technology

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Must have department approval.
  • MFET 4850 - Integration of Automated Systems

    Credits: (3)
    Typically Taught Spring Semester: Full Sem
    An Advanced Automation course designed to give the student both theory and practical application in control and integration issues dealing with automated equipment. Selected topics include motor controllers, PID’s, data collection and transfer devices, vision systems, and systems integration issues.
    Pre-requisite(s): MFET 4580 /MFET 4585 .
  • MFET 4890 INT - Cooperative Work Experience

    Credits: (1-3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Open to all fourth year students in Manufacturing Engineering Technology. A continuation of MFET 1890 .
  • MFET 4920 - Short Courses, Workshops, Institutes and Special Programs

    Credits: (1-3)
    Variable Title
    Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript. Juniors and Seniors only. Faculty approval required.
  • MFET 4995 - Certified Manufacturing Technologist (CMfgT) Exam Review

    Credits: (1)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    This course is designed to provide a structured review for the student to take the Certified Manufacturing Technologist (CMfgT) Exam.
    Pre-requisite(s): MSE 3910  or MFET 3910. 
  • MFET 5100G - Introduction to Engineering Design (IED)

    Credits: (5)
    IED provides students with opportunities to be creative and to apply their decision-making and problem-solving skills to design problems. Students use powerful computer hardware and software (Inventor) to develop 3-D models or solid renderings of objects. Using a Computer Aided Design System, students learn the product design process through creating, analyzing, rendering and producing a model. The course meets for a total of 75 hours over a two-week period and focuses on the content as well as teaching methods appropriate for the course. This course is designed specifically and only for current high school teachers who have been assigned by their schools and districts to teach the Project Lead the Way courses in their respective schools. These courses carry graduate credit for those teachers who would use them as part of a master’s degree program or for recertification.
  • MFET 5300G - Principles of Engineering (POE)

    Credits: (5)
    POE is designed to help students understand the field and the career possibilities of engineering and engineering technology. Students work on the problem-solving skills that are used at the college level and in the workplace, and they explore engineering systems and manufacturing processes. Students learn how engineers address concerns about the social and political consequences of technological change. The course meets for a total of 75 hours over a two-week period and focuses on the content as well as teaching methods appropriate for the course. This course is designed specifically and only for current high school teachers who have been assigned by their schools and districts to teach the Project Lead the Way courses in their respective schools. These courses carry graduate credit for those teachers who would use them as part of a master’s degree program or for recertification.
  • MFET 5400G - Computer Integrated Manufacturing (CIM)

    Credits: (5)
    CIM is a course that applies principles of prototyping, robotics, and automation. It builds on the solid modeling skills developed in Introduction to Engineering Design. Students use computer-controlled equipment to solve problems by constructing models of their three-dimensional designs. Students are also introduced to the fundamentals of robotics and to how this equipment is used in an automated environment. Students evaluate their design solutions using various techniques and modifications before they produce the prototype. The course meets for a total of 75 hours over a two-week period and focuses on the content as well as teaching methods appropriate for the course. This course is designed specifically and only for current high school teachers who have been assigned by their schools and districts to teach the Project Lead the Way courses in their respective schools. These courses carry graduate credit for those teachers who would use them as part of a master’s degree program or for recertification.
  • MFET 5500G - Engineering Design and Development (EDD)

    Credits: (5)
    In this course, students work on a team with one or two others to design and construct the solution to an engineering problem. The problems involve a wide range of engineering applications (e.g., a school robo-mascot, automated solar water heater, remote control hover craft). The course serves as a capstone course where students apply the principles they developed in previous courses. A journal is part of each student’s portfolio. Each team is responsible for delivering progress reports and making final presentations to an outside review panel. The course meets for a total of 75 hours over a two-week period and focuses on the content as well as teaching methods appropriate for the course. This course is designed specifically and only for current high school teachers who have been assigned by their schools and districts to teach the Project Lead the Way courses in their respective schools. These courses carry graduate credit for those teachers who would use them as part of a master’s degree program or for recertification.
  • MFET 6050 - Gateway to Technology

    Credits: (1-4)
    Typically Taught Summer Semester: 2nd Blk
    Gateway to Technology is a course designed specifically and only for current high school teachers who have been assigned by districts to teach the related Project Lead the Way course in their respective schools. Gateway to Technology introduces the Project Lead the Way series of courses covering the principles of engineering and technology. The course promotes an understanding of the field of technology and covers the continuous evolution of technology, the positive and negative impact of technology on our society, and career opportunities in technology.  The various modules in this course will utilize a train the trainer approach.  Teachers will learn technical content, teaching methodologies used to present the course, and the Project Lead the Way learning management system (Canvas).  Credit hours will be based on the number of modules taken (two credits for each one-week module).
    May be repeated 4 times and up to 8 credit hours.
  • MSE 1210 - Metal Processing and Joining for Engineers

    Credits: (3)
    Typically Taught Fall Semester: Full Sem
    Typically Taught Spring Semester: Full Sem
    Manufacturing processes for cost-effective, high-quality production. Consideration of technical capabilities and limitations of alternative methods. Includes Metal Removal, forming, welding concepts and non-tradition manufacturing processes. Course project required. Laboratory experiments include mill and lathe work, welding techniques, friction coefficients analysis and milled surface evaluation.
  • MSE 3040 - Cost Estimating and Engineering Economic Analysis

    Credits: (3)
    Typically Taught Spring Semester: Full Sem
    This course focuses on effective design and implementation of reliable, economically competitive, and environmentally benign manufacturing processes and systems. Topics will include an overview of the manufacturing systems approach in production, control, quality, automation, an introduction to facilities planning and design, an introduction to operations research and simulation in manufacturing, and engineering economics. An introduction to government manufacturing systems engineering will also be presented.
    Pre-requisite(s): MATH 1210 , MSE 3700 .
  • Page: 1 | 2